Skip to main content

What does it cost to build an internal dashboard that pulls from HubSpot, QuickBooks and Stripe?

At our rates, a custom internal dashboard that pulls from HubSpot, QuickBooks Online and Stripe costs $4,000 to about $12,000 and takes three to six weeks. A daily refresh with one role and a few views sits at the low end. Near-real-time data, per-person permissions and metrics that match records across all three systems push it to the top.

What you are paying for

Drawing the charts is the cheap part. Most of the cost goes into getting three systems that were never designed to agree to describe the same customer the same way. A three-source dashboard has five parts.

  1. Connectors: authenticated API access to HubSpot, QuickBooks Online and Stripe, including token refresh and paging through large result sets.
  2. A small database behind the dashboard, usually Postgres, holding a copy of the records the dashboard needs. You don’t need a data warehouse for this.
  3. Matching rules: which HubSpot company is which QuickBooks customer is which Stripe customer. Usually that means a stored ID, with email or domain as the fallback.
  4. Metric definitions written down and coded once: what counts as booked revenue, what counts as collected, when an invoice is overdue.
  5. The interface: the views, filters, logins and roles, plus a sync status line so people know how fresh the numbers are.

Smplfy’s internal tools and dashboards start at $4,000. We bill hourly work at $85 an hour, and we also quote fixed prices once the scope is written.

What moves the price

Five things decide where a build lands in the range. The hours below are our planning estimates for this three-source stack, not quotes.

Cost driver Low end High end Added hours (est.)
Source count HubSpot and Stripe only HubSpot, QuickBooks, Stripe plus a spreadsheet 10–20 per extra source
Refresh frequency Nightly batch Webhooks or 5–15 minute polling 15–30
Permissions Everyone sees everything Reps see own pipeline, finance sees all 10–25
Record matching Shared customer ID already exists Matching by email and domain, manual review list 15–35
History Current state only Monthly snapshots for trend lines 10–20

Refresh frequency

A nightly batch is the simplest setup and the easiest to rerun after an error. Near-real-time means Stripe webhooks, HubSpot change polling and QuickBooks change tracking, each with retries and duplicate protection. Most finance dashboards are fine with hourly updates.

Permissions

With one role, the work is a login screen. Once each rep should see only their own deals, every query has to filter by owner, and owner IDs differ between HubSpot and QuickBooks, so you need a mapping table for those too.

A worked example with numbers

Take a 40-person services company. It wants one screen that shows closed-won deals in HubSpot, the matching invoices in QuickBooks Online and the payments that have landed in Stripe, with overdue accounts flagged.

  • Trigger: an hourly job pulls HubSpot deals changed since the last run, QuickBooks invoices and payments changed since the last run, and Stripe charges and payouts. A Stripe webhook marks a payment as soon as it succeeds.
  • Matching: every HubSpot company stores its QuickBooks customer ID and Stripe customer ID. Records that fail to match go to an exceptions list instead of being guessed.
  • Views: pipeline versus invoiced versus collected by month, plus an aging table of overdue invoices with the deal owner.
  • Roles: leadership and finance see everything. Account managers see only their own accounts.
Work item Hours
Three connectors with token handling and paging 24
Database schema and incremental sync 16
Matching rules and exceptions list 14
Metric definitions and views 20
Roles and login 10
Testing against real data, runbook 12
Total 96 hours, about $8,160

If you dropped the per-owner roles and refreshed nightly, the same build would come to about 70 hours, roughly $6,000. A nearly identical setup is behind our work for Hoopes Vision, where a spreadsheet-to-database pipeline and reporting dashboard replaced manual monthly reports.

Custom build versus Looker Studio or Metabase

BI tools are often the right call. The real question is where the data comes from before the tool reads it.

Option Upfront cost Monthly cost Who maintains it What breaks first
Looker Studio with third-party connectors A few hours of setup Looker Studio is free; connectors for HubSpot, QuickBooks and Stripe are typically paid per source (general market range: tens of dollars a month each) You, plus the connector vendor Cross-source joins and connector quotas
Metabase on a database you fill Sync work still needed, often $2,000–$5,000 at our rates Free to self-host; hosted plans are a subscription You for charts, an engineer for the sync The sync scripts when an API changes
Custom dashboard $4,000–$12,000 at our rates Hosting, usually small Whoever holds the runbook Upstream field changes, handled in one place

Looker Studio is strongest when each chart reads from a single source. It struggles when one row has to combine a HubSpot deal, a QuickBooks invoice and a Stripe payment. Metabase is a good front end over a clean database, and we sometimes build the sync and put Metabase on top of it instead of writing a custom interface.

Failure modes to plan for

  • Rate limits: HubSpot and QuickBooks both throttle API calls, so a first full load of several years of history has to be paced and able to resume.
  • Re-authentication: QuickBooks access tokens expire after about an hour and must be refreshed. If a refresh token lapses, the sync stops quietly unless something sends an alert.
  • Upstream field changes: someone renames a HubSpot deal stage, and "closed-won revenue" drops to zero overnight.
  • Duplicates: the same customer exists twice in QuickBooks, and revenue gets counted twice.
  • Out-of-order data: a Stripe payment arrives before its invoice has synced, and it has to be held and retried, not dropped.
  • Partial failures: one source fails while the other two succeed, so the dashboard has to show which numbers are stale.

When to build, when to buy, when to wait

Use Looker Studio or a vendor’s built-in reports if each question you ask touches one system, or if fewer than five people will look at the dashboard. You don’t need to hire anyone for that.

Build custom, or a custom sync with Metabase on top, once you need numbers that join all three systems, per-role visibility, or a refresh faster than daily. The same applies if someone currently spends hours a month rebuilding the report by hand.

Wait if your records don’t share customer IDs yet and nobody owns the metric definitions. Fix the IDs and agree on what "revenue" means first, because a dashboard only displays whatever disagreement is already in the data. Loading everything into a full analytics warehouse is a separate project and outside what we do.

Frequently asked questions

How long does it take to build a HubSpot, QuickBooks and Stripe dashboard?
Three to six weeks from an agreed scope to a working dashboard. The low end assumes a nightly refresh and one user role. Webhooks, per-owner permissions and messy customer matching push it toward six weeks.

Can Looker Studio combine HubSpot, QuickBooks and Stripe data?
Only through third-party connectors, which usually charge per source each month. It handles charts that read from one source well. It gets fragile when one row has to join a deal, an invoice and a payment, because the matching logic has nowhere reliable to live.

Is Metabase cheaper than a custom dashboard?
The Metabase software can be free to self-host, but it needs a database that already holds clean, matched data. Building that sync is most of the cost of a custom dashboard either way. Metabase saves you mainly the interface work.

What does it cost to run the dashboard after it is built?
Hosting for a small database and a scheduled sync is usually a minor monthly cost. The bigger ongoing cost is fixing the sync when a field changes upstream or a token expires. A runbook and alerts keep that to a few hours a year in a stable setup.

Do we need a data warehouse for this?
Not for a dashboard over three business systems. A small Postgres database holding just the records the dashboard uses is enough for most 10–200 person companies. A warehouse project is a different scope and outside what we build.

Related answers

Want a scoped estimate for your dashboard?

We’ll send a free written scope or do a free 20-minute call. Have three things ready: which systems the data lives in, roughly how many customers and invoices you have, and which report someone builds by hand today. Start a conversation.